Modelling tools

CAKE TESTER / SCRIBER - CODE: PULDE7

6.5 inches (165mm) thin scriber for marking out patterns on sugarpaste. Can also be used as a cake tester or clearing blocked icing tubes.		 £ 1.90

to buy / more info -->

CUTTING WHEEL - CODE: PMECW426

Cutting wheels - cutting tool with a different size wheel at each end for cutting small and intricate shapes from petal paste, pastillage, sugarpaste and marzipan. 		£ 3.40

to buy / more info -->

DESIGN WHEELER WITH 3 HEADS - CODE: PMEDW420

Design wheeler with three interchangeable heads for creating patterns to complement Garrett Frills on sugarpaste cakes. Also marks straight lines, stitching and zig zags.		 £ 4.60

to buy / more info -->

DISPOSABLE CRAFT KNIFE - CODE: PMEDK15

Disposable craft knife.		 £ 1.05

to buy / more info -->

DRESDEN TOOL - CODE: CULJC754

A most useful tool for fluting and frilling petals. This tool will help to increase the size of any petal. Its pointed tip is used to emphasize the centre of some flowers and the veining end with make vein markings difficult to create with other veiners.		 £ 3.00

to buy / more info -->

PETAL VEINER / FRILLER TOOL - CODE: CULJC762

This tool is designed for veining and frilling petals while the other end is shaped for making ''smiles'' and ''eyebrows''.		 £ 3.00

to buy / more info -->

QUILTING TOOL - CODE: PMEQT425

A quilting tool.		 £ 3.50

to buy / more info -->

SET OF 8 PME MODELLING TOOLS - CODE: PMEBK123

Set of 10 modelling tools including (see below for descriptions of individual tools).

Pack includes:
Bone Tool
Shell & Blade Tool
Ball Tool
Scallop & Comb Tool
Serrated & Tapered Cone Tool
Tapered Cones 5/6 Star Tool
Bulbulous Cone Tool
Flower/Leaf Shaper Tool		 £ 21.00

to buy / more info -->

PME BONE TOOL - CODE: PME1

Bone tool - used to smooth curves when modelling and to cup and frill petals in flower making.

 £ 3.40

to buy / more info -->

PME BLADE AND SHELL TOOL - CODE: PME2

Blade and shell tool - use blade to cut and shape in modelling and flower making. Use shell end to emboss pattern.		 £ 3.40

to buy / more info -->

PME BALL TOOL - CODE: PME3

Ball tool - use to make round indentations and smooth curves in modelling and cup and frill petals in flower making.		 £ 3.40

to buy / more info -->

PME SCALLOP AND COMB TOOL - CODE: PME4

Scallop and comb tool - use scallop end to cut scalloped edge, cut circular holes in plaques and emboss mouth shape on faces. Comb end can be used to mark dotted lines to represent stitching or score parallel lines.		 £ 3.40

to buy / more info -->

PME SERRATED AND TAPER CONE TOOL - CODE: PME5

Serrated and taper cone tool - serrated cone can be used to emboss star pattern or to mark divisions in tubular flowers. Taper cone end can be used to hollow out tubular flowers such as Freesias.		 £ 3.40

to buy / more info -->

PME SCRIBER NEEDLE - CODE: PME6

Scriber needle tool - can be used for scribing (marking) patterns and dots on icing.		 £ 3.40

to buy / more info -->

PME SUGARCRAFT KNIFE WITH INSERTION BLADE - CODE: PME7

Sugarcraft knife with ribbon inserting blade - the sugarcraft knife with angled blade can be used for fine cutting purposes. The sugarcraft knife with ribbon insertion blade is used to cut slots in icing and then used to push short sections of ribbon into the slots to simulate a continuous ribbon thread.		 £ 3.40

to buy / more info -->

RIBBON INSERTION BLADES FOR PME7 CRAFT KNIFE - CODE: PME7R

5 spare ribbon insertion blades to go with PME sugarcraft knife.		 £ 1.90

to buy / more info -->

SCALPEL BLADES TO GO WITH PME7 - CODE: PME7S

5 spare scalpel blades to go with PME sugarcraft knife.		 £ 1.90

to buy / more info -->

PME TAPER CONES MODELLING TOOL - CODE: PME8

Taper cones 5/6 star modelling tool - the cones can be used to emboss small star patterns or to mark divisions in tubular flowers.		 £ 3.40

to buy / more info -->

PME BULBULOUS CONE TOOL - CODE: PME9

Bulbulous cone tool - use both ends to hollow and shape flowers. Can also be used for frilling Garrett Frills.		 £ 3.40

to buy / more info -->

PME FLOWER AND LEAF SHAPING TOOL - CODE: PME10

Flower and leaf shaping tool - used to carve and shape flowers and leaves and can also be used for marking veins.		 £ 3.40

to buy / more info -->

MEDIUM CELPIN FOR MODELLING & FRILLING FLOWERS - CODE: CELPINM

Celpin made from non-stick material for modelling and frilling flower paste etc.
Size: 10mm diam. x 160mm 		£ 2.78

to buy / more info -->

SINGLE CELSTICK FOR MODELLING & FRILLING FLOWERS - CODE: CELSTICKSCS

Single Celstick made from non-stick material for modelling and frilling flower paste etc.
Size:3mm diam. x 110mm		 £ 1.68

to buy / more info -->

2 CELSTICKS FOR MODELLING & FRILLING FLOWERS - CODE: CELSTICKS

2 Celsticks made from non-stick material that are ideal for modelling and frilling your flower paste etc. They have a rounded end for use as a balling tool and a pointed end useful for hollowing out trumpet flowers and mexican hats.
Sizes: 6mm diam. x 150mm long and 3mm diam. x 110mm long 		£ 3.60

to buy / more info -->

STAINLESS STEEL FRILL ROLLER - CODE: PULDE5

Stainless steel frill roller for use with all petal pastes and porcelain paste.

Size: 6 inches (15cm)		 £ 3.86

to buy / more info -->